Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

Crystal structures of silicon-rich lithium silicides at high pressure

Silicon (Si) is one of the most essential elements, as it is indispensable for modern electronic technology. The standard Si structure at ambient conditions is the cubic diamond structure, and it has an indirect band gap, which prevents it from being considered as a next-generation platform for semiconductor technologies. Therefore, the search for new allotropes of silicon has attracted great attention. Herein, first principles swarm-intelligence structure searches coupled with density-functional theory were performed to explore the stable high-pressure phases of silicon-rich lithium containing compounds, LiSi_x ($x=4\text{–}8$). The LiSi₄ stoichiometry was predicted to be stable, and it was found to assume one of the following space groups, P4/mnc, Cmmm, and C2/m within the pressure range of 0 to 50 GPa. By removing the Li atoms from these compounds, three silicon allotropes were obtained that were metastable at ambient pressures. Our work illustrates how novel silicon allotropes can be predicted using the CALYPSO method.     

Copper-Catalyzed Trifunctionalization of Alkynes: Rapid Formation of Oxindoles Bearing Geminal Diboronates

A copper-catalyzed trifunctionalization of alkynes that provides rapid access to oxindoles bearing a geminal diboronate side chain, highlighted by the simultaneous formation of one C−C bond and two C−B bonds, is reported. This new reaction features simple reaction conditions (ligand-free catalysis), a general substrate scope, and excellent chemoselectivity. Mechanistic study revealed a reaction sequence constituted by, in the order, borylation, intramolecular cross-coupling, hydroboration, which has been rarely documented.     

Construction of Cyclobutanes by Multicomponent Cascade Reactions in Homogeneous Solution through Visible-Light Catalysis

[2+2] Photocycloaddition of two olefins is a general method to assemble the core scaffold, cyclobutane, found in numerous bioactive molecules. A new approach to synthesize cyclobutanes through multicomponent cascade reactions by merging aldol reaction and Witting reaction with visible-light-induced [2+2] cycloaddition is reported. An array of cyclobutanes with high selectivity has been achieved from commercially available aldehydes, ketones (or phosphorus ylide), and olefins with visible-light irradiation of a catalytic amount of (fac-tris(2-phenylpyridinato-C₂,N)iridium) ([Ir(ppy)₃]) at room temperature. Control experiments and spectroscopic studies revealed that the triplet–triplet energy transfer from the excited [Ir(ppy)₃]* to enones, generated in situ from aldehyde and ketone or aldehyde and phosphorus ylide, is responsible for these simple and efficient muticomponent transformations.     

Self-Healable Polyelectrolytes with Mechanical Enhancement for Flexible and Durable Supercapacitors

The practical application of advanced personalized electronics is inseparable from flexible, durable, and even self-healable energy storage devices. However, the mechanical and self-healing performance of supercapacitors is still limited at present. Herein, highly transparent, stretchable, and self-healable poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/poly(vinyl alcohol) (PVA)/LiCl polyelectrolytes were facilely prepared by one-step radical polymerization. The cooperation of PAMPSA and PVA significantly increased the mechanical and self-healing capacity of the polyelectrolyte, which exhibited superior stretchability of 938 %, stress of 112.68 kPa, good electrical performance (ionic conductivity up to 20.6 mS cm⁻¹), and high healing efficiency of 92.68 % after 24 h. After assembly with polypyrrole-coated single-walled carbon nanotubes, the resulting as-prepared supercapacitor had excellent electrochemical properties with high areal capacitance of 297 mF cm⁻² at 0.5 mA cm⁻² and good rate capability (218 mF cm⁻² at 5 mA cm⁻²). Besides, after cutting in two the supercapacitor recovered 99.2 % of its original specific capacitance after healing for 24 h at room temperature. The results also showed negligible change in the interior contact resistance of the supercapacitor after ten cutting/healing cycles. The present work provides a possible solution for the development of smart and durable energy storage devices with low cost for next-generation intelligent electronics.     

A new dimeric alkylresorcinol from the stem barks of Swintonia floribunda (Anacardiaceae)

From an EtOAc-soluble fraction of the stem barks of Swintonia floribunda (Anacardiaceae), one new dimeric alkylresorcinol named integracin E (1), together with 4 known compounds (2–5) were isolated. Their chemical structures were elucidated based on the spectroscopic data interpretation. The absolute configuration of 1 was determined by the specific rotation analysis of its acid-catalyzed hydrolysis product. Compound 1 showed potent tyrosinase inhibitory activity with an IC₅₀ value of 48.2?μM.     

Visual exploration of dependency graph in source code via embedding-based similarity

Journal of Visualization -  A large software system contains millions of lines of source code, and the development often involves many developers over a long period. How to understand and...     

Mechanism and Stereoselectivity of the Elementometalation Process of Activated Alkyne RCCR(RCO2Me) by Cp2TaH3

The elementometalation process is a fundamental chemical step in several catalytic cycles. In this work, density functional theory computations have elucidated the detailed elementometalation mechanism of activated alkyne RCCR(RCO₂Me) by Cp₂TaH₃ and rationalized the selectivity in experimental findings. The calculated results show that in the formation process of (E)-olefin monohydride((E)-Pro), the Gibbs free energy barrier is low and the entire reaction is spontaneous and exothermic; thus, (E)-Pro can be formed easily. The formation of (Z)-η²-olefin monohydride complex ((Z)-Pro) is difficult due to its high Gibbs free energy barrier. The formation process (E)-Pro consists of the following five steps: hydride H1-shift, conformational isomerism 1, hydride H2-shift, conformational isomerism 2, and olefin coordination process. Topological analysis shows that there is a five-membered ring plane structure in the reaction pathway and that the final product (E)-Pro belongs to a typical η²-olefin monohydride complex. Our calculated results provide an explanation for experimental observations and useful insights for further development of olefin functionalization. © 2019 Wiley Periodicals, Inc.     

Redox-Active Two-Dimensional Covalent Organic Frameworks (COFs) for Selective Reductive Separation of Valence-Variable,Redox-Sensitive and Long-Lived Radionuclides

We report the first example of 2D covalent organic framework nanosheets (Redox-COF1) for the selective reduction and in situ loading of valence-variable, redox-sensitive and long-lived radionuclides (abbreviated as VRL nuclides). Compared with sorbents based on chemical adsorption and physical adsorption, the redox adsorption mechanism of Redox-COF1 can effectively reduce the impact of functional group protonation under the usual high-acidity conditions in chemisorption, and raise the adsorption efficiency from the monotonous capture by pores in physisorption. The adsorption selectivity for UO₂²⁺ reaches up to unprecedented ca. 97 % at pH 3, more than for any analogous adsorbing material.     

Noise-induced phenomena in a versatile class of prototype dynamical system with time delay

Nonlinear Dynamics - This work presents a general class of prototype birhythmic dynamical systems, which can be extensively used to study the generation of complex bifurcation of limit cycles....